com.dalsemi.onewire.container
Class OneWireContainer1D

java.lang.Object
  |
  +--com.dalsemi.onewire.container.OneWireContainer
        |
        +--com.dalsemi.onewire.container.OneWireContainer1D

public class OneWireContainer1D

extends OneWireContainer

1-Wire container for 512 byte memory with external counters, DS2423. This container encapsulates the functionality of the 1-Wire family type 1D (hex)

This 1-Wire device is primarily used as a counter with memory.

Each counter is assosciated with a memory page. The counters for pages 12 and 13 are incremented with a write to the memory on that page. The counters for pages 14 and 15 are externally triggered. See the method readCounter to read a counter directly. Note that the the counters may also be read with the PagedMemoryBank interface as 'extra' information on a page read.

Features

• 4096 bits (512 bytes) of read/write nonvolatile memory
• 256-bit (32-byte) scratchpad ensures integrity of data transfer
• Memory partitioned into 256-bit (32-byte) pages for packetizing data
• Data integrity assured with strict read/write protocols
• Overdrive mode boosts communication to 142 kbits per second
• Four 32-bit read-only non rolling-over page write cycle counters
• Active-low external trigger inputs for two of the counters with on-chip debouncing compatible with reed and Wiegand switches
• 32 factory-preset tamper-detect bits to indicate physical intrusion
• On-chip 16-bit CRC generator for safeguarding data transfers
• Operating temperature range from -40°C to +70°C
• Over 10 years of data retention

Memory

The memory can be accessed through the objects that are returned from the getMemoryBanks method.

The following is a list of the MemoryBank instances that are returned:

• Scratchpad Ex
  • Implements MemoryBank, PagedMemoryBank
  • Size 32 starting at physical address 0
  • Features Read/Write not-general-purpose volatile
  • Pages 1 pages of length 32 bytes
  • Extra information for each page Target address, offset, length 3
• Main Memory
  • Implements MemoryBank, PagedMemoryBank
  • Size 384 starting at physical address 0
  • Features Read/Write general-purpose non-volatile
  • Pages 12 pages of length 32 bytes giving 29 bytes Packet data payload
  • Page Features page-device-CRC
• Memory with write cycle counter
  • Implements MemoryBank, PagedMemoryBank
  • Size 64 starting at physical address 384
  • Features Read/Write general-purpose non-volatile
  • Pages 2 pages of length 32 bytes giving 29 bytes Packet data payload
  • Page Features page-device-CRC
  • Extra information for each page Write cycle counter, length 8
• Memory with externally triggered counter
  • Implements MemoryBank, PagedMemoryBank
  • Size 64 starting at physical address 448
  • Features Read/Write general-purpose non-volatile
  • Pages 2 pages of length 32 bytes giving 29 bytes Packet data payload
  • Page Features page-device-CRC
  • Extra information for each page Externally triggered counter, length 8

Usage

Example

Read the two external counters of this containers instance 'owd':

 
  System.out.print("Counter on page 14: " + owd.readCounter(14));
  System.out.print("Counter on page 15: " + owd.readCounter(15));
  

See the usage example in OneWireContainer to enumerate the MemoryBanks.

See the usage examples in MemoryBank and PagedMemoryBank for bank specific operations.

DataSheet

http://pdfserv.maxim-ic.com/arpdf/DS2422-DS2423.pdf

Version:

0.00, 28 Aug 2000

Author:

DS

See Also:

MemoryBank, PagedMemoryBank

Constructor Summary

OneWireContainer1D()
Create an empty container that is not complete until after a call to setupContainer.

OneWireContainer1D(DSPortAdapter sourceAdapter, byte[] newAddress)
Create a container with the provided adapter instance and the address of the iButton or 1-Wire device.

OneWireContainer1D(DSPortAdapter sourceAdapter, long newAddress)
Create a container with the provided adapter instance and the address of the iButton or 1-Wire device.

OneWireContainer1D(DSPortAdapter sourceAdapter, String newAddress)
Create a container with the provided adapter instance and the address of the iButton or 1-Wire device.

Method Summary

String	getDescription() Get a short description of the function of this iButton or 1-Wire Device type.
int	getMaxSpeed() Get the maximum speed this iButton or 1-Wire device can communicate at.
Enumeration	getMemoryBanks() Get an enumeration of memory bank instances that implement one or more of the following interfaces: MemoryBank, PagedMemoryBank, and OTPMemoryBank.
String	getName() Get the Dallas Semiconductor part number of the iButton or 1-Wire Device as a string.
long	readCounter(int counterPage) Read the counter value associated with a page on this 1-Wire Device.

Methods inherited from class com.dalsemi.onewire.container.OneWireContainer

doSpeed, equals, getAdapter, getAddress, getAddressAsLong, getAddressAsString, getAlternateNames, hashCode, isAlarming, isPresent, setSpeed, setupContainer, setupContainer, setupContainer, toString

Methods inherited from class java.lang.Object

getClass, notify, notifyAll, wait, wait, wait

Constructor Detail

OneWireContainer1D

public OneWireContainer1D()

Create an empty container that is not complete until after a call to setupContainer.

This is one of the methods to construct a container. The others are through creating a OneWireContainer with parameters.

See Also:

super.setupContainer()

OneWireContainer1D

public OneWireContainer1D(DSPortAdapter sourceAdapter,
                          byte[] newAddress)

Create a container with the provided adapter instance and the address of the iButton or 1-Wire device.

This is one of the methods to construct a container. The other is through creating a OneWireContainer with NO parameters.

Parameters:

sourceAdapter - adapter instance used to communicate with this iButton

newAddress - Address of this 1-Wire device

See Also:

OneWireContainer1D, utils.Address

OneWireContainer1D

public OneWireContainer1D(DSPortAdapter sourceAdapter,
                          long newAddress)

Create a container with the provided adapter instance and the address of the iButton or 1-Wire device.

This is one of the methods to construct a container. The other is through creating a OneWireContainer with NO parameters.

Parameters:

sourceAdapter - adapter instance used to communicate with this 1-Wire device

newAddress - Address of this 1-Wire device

See Also:

OneWireContainer1D, utils.Address

OneWireContainer1D

public OneWireContainer1D(DSPortAdapter sourceAdapter,
                          String newAddress)

Create a container with the provided adapter instance and the address of the iButton or 1-Wire device.

This is one of the methods to construct a container. The other is through creating a OneWireContainer with NO parameters.

Parameters:

sourceAdapter - adapter instance used to communicate with this 1-Wire device

newAddress - Address of this 1-Wire device

See Also:

OneWireContainer1D, utils.Address

Method Detail

getName

public String getName()

Get the Dallas Semiconductor part number of the iButton or 1-Wire Device as a string. For example 'DS1992'.

Overrides:

getName in class OneWireContainer

Returns:

iButton or 1-Wire device name

getDescription

public String getDescription()

Get a short description of the function of this iButton or 1-Wire Device type.

Overrides:

getDescription in class OneWireContainer

Returns:

device description

getMaxSpeed

public int getMaxSpeed()

Get the maximum speed this iButton or 1-Wire device can communicate at. Override this method if derived iButton type can go faster then SPEED_REGULAR(0).

Overrides:

getMaxSpeed in class OneWireContainer

Returns:

maximum speed

See Also:

super.setSpeed, DSPortAdapter.SPEED_REGULAR, DSPortAdapter.SPEED_OVERDRIVE, DSPortAdapter.SPEED_FLEX

getMemoryBanks

public Enumeration getMemoryBanks()

Get an enumeration of memory bank instances that implement one or more of the following interfaces: MemoryBank, PagedMemoryBank, and OTPMemoryBank.

Overrides:

getMemoryBanks in class OneWireContainer

Returns:

Enumeration of memory banks

readCounter

public long readCounter(int counterPage)
                 throws OneWireIOException,
                        OneWireException

Read the counter value associated with a page on this 1-Wire Device.

Parameters:

counterPage - page number of the counter to read

Returns:

4 byte value counter stored in a long integer

Throws:

OneWireIOException - on a 1-Wire communication error such as no 1-Wire device present. This could be caused by a physical interruption in the 1-Wire Network due to shorts or a newly arriving 1-Wire device issuing a 'presence pulse'.

OneWireException - on a communication or setup error with the 1-Wire adapter