Uses of Class
com.dalsemi.onewire.adapter.OneWireIOException

Packages that use OneWireIOException

com.dalsemi.onewire
com.dalsemi.onewire.adapter
com.dalsemi.onewire.application.monitor
com.dalsemi.onewire.application.sha
com.dalsemi.onewire.application.tag
com.dalsemi.onewire.container
com.dalsemi.onewire.utils

Uses of OneWireIOException in com.dalsemi.onewire

Methods in com.dalsemi.onewire that throw OneWireIOException

static DSPortAdapter	OneWireAccessProvider.getAdapter(String adapterName, String portName) Finds, opens, and verifies the specified adapter on the indicated port.
static DSPortAdapter	OneWireAccessProvider.getDefaultAdapter() Finds, opens, and verifies the default adapter and port.

Uses of OneWireIOException in com.dalsemi.onewire.adapter

Methods in com.dalsemi.onewire.adapter that throw OneWireIOException

abstract boolean	DSPortAdapter.selectPort(String portName) Specifies a platform appropriate port name for this adapter.
abstract boolean	DSPortAdapter.adapterDetected() Detects adapter presence on the selected port.
String	DSPortAdapter.getAdapterVersion() Retrieves the version of the adapter.
String	DSPortAdapter.getAdapterAddress() Retrieves the address of the adapter, if it has one.
boolean	DSPortAdapter.canOverdrive() Returns whether adapter can physically support overdrive mode.
boolean	DSPortAdapter.canHyperdrive() Returns whether the adapter can physically support hyperdrive mode.
boolean	DSPortAdapter.canFlex() Returns whether the adapter can physically support flex speed mode.
boolean	DSPortAdapter.canProgram() Returns whether adapter can physically support 12 volt power mode.
boolean	DSPortAdapter.canDeliverPower() Returns whether the adapter can physically support strong 5 volt power mode.
boolean	DSPortAdapter.canDeliverSmartPower() Returns whether the adapter can physically support "smart" strong 5 volt power mode.
boolean	DSPortAdapter.canBreak() Returns whether adapter can physically support 0 volt 'break' mode.
Enumeration	DSPortAdapter.getAllDeviceContainers() Returns an enumeration of OneWireContainer objects corresponding to all of the iButtons or 1-Wire devices found on the 1-Wire Network.
OneWireContainer	DSPortAdapter.getFirstDeviceContainer() Returns a OneWireContainer object corresponding to the first iButton or 1-Wire device found on the 1-Wire Network.
OneWireContainer	DSPortAdapter.getNextDeviceContainer() Returns a OneWireContainer object corresponding to the next iButton or 1-Wire device found.
abstract boolean	DSPortAdapter.findFirstDevice() Returns true if the first iButton or 1-Wire device is found on the 1-Wire Network.
abstract boolean	DSPortAdapter.findNextDevice() Returns true if the next iButton or 1-Wire device is found.
boolean	DSPortAdapter.isPresent(byte[] address) Verifies that the iButton or 1-Wire device specified is present on the 1-Wire Network.
boolean	DSPortAdapter.isPresent(long address) Verifies that the iButton or 1-Wire device specified is present on the 1-Wire Network.
boolean	DSPortAdapter.isPresent(String address) Verifies that the iButton or 1-Wire device specified is present on the 1-Wire Network.
boolean	DSPortAdapter.isAlarming(byte[] address) Verifies that the iButton or 1-Wire device specified is present on the 1-Wire Network and in an alarm state.
boolean	DSPortAdapter.isAlarming(long address) Verifies that the iButton or 1-Wire device specified is present on the 1-Wire Network and in an alarm state.
boolean	DSPortAdapter.isAlarming(String address) Verifies that the iButton or 1-Wire device specified is present on the 1-Wire Network and in an alarm state.
boolean	DSPortAdapter.select(byte[] address) Selects the specified iButton or 1-Wire device by broadcasting its address.
boolean	DSPortAdapter.select(long address) Selects the specified iButton or 1-Wire device by broadcasting its address.
boolean	DSPortAdapter.select(String address) Selects the specified iButton or 1-Wire device by broadcasting its address.
void	DSPortAdapter.assertSelect(byte[] address) Selects the specified iButton or 1-Wire device by broadcasting its address.
void	DSPortAdapter.assertSelect(long address) Selects the specified iButton or 1-Wire device by broadcasting its address.
void	DSPortAdapter.assertSelect(String address) Selects the specified iButton or 1-Wire device by broadcasting its address.
abstract void	DSPortAdapter.putBit(boolean bitValue) Sends a bit to the 1-Wire Network.
abstract boolean	DSPortAdapter.getBit() Gets a bit from the 1-Wire Network.
abstract void	DSPortAdapter.putByte(int byteValue) Sends a byte to the 1-Wire Network.
abstract int	DSPortAdapter.getByte() Gets a byte from the 1-Wire Network.
abstract byte[]	DSPortAdapter.getBlock(int len) Gets a block of data from the 1-Wire Network.
abstract void	DSPortAdapter.getBlock(byte[] arr, int len) Gets a block of data from the 1-Wire Network and write it into the provided array.
abstract void	DSPortAdapter.getBlock(byte[] arr, int off, int len) Gets a block of data from the 1-Wire Network and write it into the provided array.
abstract void	DSPortAdapter.dataBlock(byte[] dataBlock, int off, int len) Sends a block of data and returns the data received in the same array.
abstract int	DSPortAdapter.reset() Sends a Reset to the 1-Wire Network.
void	DSPortAdapter.setPowerDuration(int timeFactor) Sets the duration to supply power to the 1-Wire Network.
boolean	DSPortAdapter.startPowerDelivery(int changeCondition) Sets the 1-Wire Network voltage to supply power to a 1-Wire device.
void	DSPortAdapter.setProgramPulseDuration(int timeFactor) Sets the duration for providing a program pulse on the 1-Wire Network.
boolean	DSPortAdapter.startProgramPulse(int changeCondition) Sets the 1-Wire Network voltage to eprom programming level.
void	DSPortAdapter.startBreak() Sets the 1-Wire Network voltage to 0 volts.
void	DSPortAdapter.setPowerNormal() Sets the 1-Wire Network voltage to normal level.
void	DSPortAdapter.setSpeed(int speed) Sets the new speed of data transfer on the 1-Wire Network.
void	NetAdapter.pingHost() Sends a ping to the host, just to keep the connection alive.
boolean	NetAdapter.adapterDetected() Detects adapter presence on the selected port.
boolean	NetAdapter.selectPort(String portName) Specifies a platform appropriate port name for this adapter.
boolean	NetAdapter.selectPort(Socket sock) New method, unique to NetAdapter.
boolean	NetAdapter.canOverdrive() Returns whether adapter can physically support overdrive mode.
boolean	NetAdapter.canHyperdrive() Returns whether the adapter can physically support hyperdrive mode.
boolean	NetAdapter.canFlex() Returns whether the adapter can physically support flex speed mode.
boolean	NetAdapter.canProgram() Returns whether adapter can physically support 12 volt power mode.
boolean	NetAdapter.canDeliverPower() Returns whether the adapter can physically support strong 5 volt power mode.
boolean	NetAdapter.canDeliverSmartPower() Returns whether the adapter can physically support "smart" strong 5 volt power mode.
boolean	NetAdapter.canBreak() Returns whether adapter can physically support 0 volt 'break' mode.
boolean	NetAdapter.findFirstDevice() Returns true if the first iButton or 1-Wire device is found on the 1-Wire Network.
boolean	NetAdapter.findNextDevice() Returns true if the next iButton or 1-Wire device is found.
int	NetAdapter.reset() Sends a Reset to the 1-Wire Network.
void	NetAdapter.putBit(boolean bitValue) Sends a bit to the 1-Wire Network.
boolean	NetAdapter.getBit() Gets a bit from the 1-Wire Network.
void	NetAdapter.putByte(int byteValue) Sends a byte to the 1-Wire Network.
int	NetAdapter.getByte() Gets a byte from the 1-Wire Network.
byte[]	NetAdapter.getBlock(int len) Gets a block of data from the 1-Wire Network.
void	NetAdapter.getBlock(byte[] arr, int len) Gets a block of data from the 1-Wire Network and write it into the provided array.
void	NetAdapter.getBlock(byte[] arr, int off, int len) Gets a block of data from the 1-Wire Network and write it into the provided array.
void	NetAdapter.dataBlock(byte[] dataBlock, int off, int len) Sends a block of data and returns the data received in the same array.
void	NetAdapter.setPowerDuration(int timeFactor) Sets the duration to supply power to the 1-Wire Network.
boolean	NetAdapter.startPowerDelivery(int changeCondition) Sets the 1-Wire Network voltage to supply power to a 1-Wire device.
void	NetAdapter.setProgramPulseDuration(int timeFactor) Sets the duration for providing a program pulse on the 1-Wire Network.
boolean	NetAdapter.startProgramPulse(int changeCondition) Sets the 1-Wire Network voltage to eprom programming level.
void	NetAdapter.startBreak() Sets the 1-Wire Network voltage to 0 volts.
void	NetAdapter.setPowerNormal() Sets the 1-Wire Network voltage to normal level.
void	NetAdapter.setSpeed(int speed) Sets the new speed of data transfer on the 1-Wire Network.

Uses of OneWireIOException in com.dalsemi.onewire.application.monitor

Methods in com.dalsemi.onewire.application.monitor that throw OneWireIOException

abstract void	AbstractDeviceMonitor.search(Vector arrivals, Vector departures) Performs a search of the 1-Wire network
void	NetworkDeviceMonitor.search(Vector arrivals, Vector departures) Performs a search of the 1-Wire network, with branch searching
void	DeviceMonitor.search(Vector arrivals, Vector departures) Performs a search of the 1-Wire network without searching branches

Uses of OneWireIOException in com.dalsemi.onewire.application.sha

Methods in com.dalsemi.onewire.application.sha that throw OneWireIOException

abstract boolean	SHATransaction.setupTransactionData(SHAiButtonUser user) Setups initial transaction data on SHAiButtonUser.
abstract boolean	SHATransaction.verifyUser(SHAiButtonUser user) Verifies that SHAiButtonUser is a valid user of this service.
abstract boolean	SHATransaction.verifyTransactionData(SHAiButtonUser user) Verifies account data is valid for this service.
abstract boolean	SHATransaction.executeTransaction(SHAiButtonUser user, boolean verifySuccess) Performs the transaction.
boolean	SHADebitUnsigned.setupTransactionData(SHAiButtonUser user) Setup account data on a fresh user iButton.
boolean	SHADebitUnsigned.verifyUser(SHAiButtonUser user) Verifies user's authentication response.
boolean	SHADebitUnsigned.verifyTransactionData(SHAiButtonUser user) Verifies user's account data.
boolean	SHADebitUnsigned.executeTransaction(SHAiButtonUser user, boolean verifySuccess) Performs the unsigned debit, subtracting the debit amount from the user's balance and storing the new, unsigned account data on the user's iButton.
boolean	SHAiButtonCopr.createDataSignature(byte[] accountData, byte[] signScratchpad, byte[] mac_buffer, int macStart) Given a 32-byte array for page data and a 32-byte array for scratchpad content, this function will create a 20-byte signature for the data based on SHA-1.
boolean	SHAiButtonCopr.createDataSignatureAuth(byte[] accountData, byte[] signScratchpad, byte[] mac_buffer, int macStart, byte[] fullBindCode) Creates a data signature, but instead of using the signing secret, it uses the authentication secret, bound for a particular button.
boolean	SHAiButtonCopr.generateChallenge(int offset, byte[] ch, int start) Generates a 3 byte random challenge in the iButton, sufficient to be used as a challenge to be answered by a User iButton.
boolean	SHAiButtonCopr.verifyAuthentication(byte[] fullBindCode, byte[] pageData, byte[] scratchpad, byte[] verify_mac, byte authCmd) Determines if a SHAiButtonUser belongs to the system defined by this Coprocessor iButton.See the usage example in this class for initializing a Coprocessor iButton.
boolean	SHAiButtonCopr.verifySignature(byte[] pageData, byte[] scratchpad, byte[] verify_mac) Verifies a User iButton's signed data on this Coprocessor iButton.
boolean	SHAiButtonCoprVM.save(String filename, boolean saveSecretData) Saves simulated coprocessor configuration info to an (almost) standard-format to a hard drive file.
boolean	SHAiButtonCoprVM.save(OneWireContainer owc, String filename, boolean saveSecretData) Saves simulated coprocessor configuration info to an (almost) standard-format to a 1-Wire Memory Device's TMEX file.
boolean	SHAiButtonCoprVM.createDataSignature(byte[] accountData, byte[] signScratchpad, byte[] mac_buffer, int macStart) Given a 32-byte array for page data and a 32-byte array for scratchpad content, this function will create a 20-byte signature for the data based on SHA-1.
boolean	SHAiButtonCoprVM.generateChallenge(int offset, byte[] ch, int start) Generates a 3 byte random challenge in the iButton, sufficient to be used as a challenge to be answered by a User iButton.
boolean	SHAiButtonCoprVM.verifyAuthentication(byte[] fullBindCode, byte[] pageData, byte[] scratchpad, byte[] verify_mac, byte authCmd) Determines if a SHAiButtonUser belongs to the system defined by this Coprocessor iButton.See the usage example in this class for initializing a Coprocessor iButton.
boolean	SHAiButtonCoprVM.createDataSignatureAuth(byte[] accountData, byte[] signScratchpad, byte[] mac_buffer, int macStart, byte[] fullBindCode) Creates a data signature, but instead of using the signing secret, it uses the authentication secret, bound for a particular button.
boolean	SHAiButtonCoprVM.verifySignature(byte[] pageData, byte[] scratchpad, byte[] verify_mac) Verifies a User iButton's signed data on this Coprocessor iButton.
abstract boolean	SHAiButtonUser.setiButtonUser(DSPortAdapter adapter, byte[] address) Modifies this SHA iButton so that it refers to another device.
abstract boolean	SHAiButtonUser.setiButtonUser(byte[] address) Modifies this SHA iButton so that it refers to another device.
abstract int	SHAiButtonUser.getWriteCycleCounter() Returns the value of the write cycle counter for the page where the account data is stored.
abstract boolean	SHAiButtonUser.writeAccountData(byte[] dataBuffer, int offset) Writes the account data to the SHAiButton.
abstract boolean	SHAiButtonUser.readAccountData(byte[] dataBuffer, int offset) Reads the account data off the SHAiButton using a standard READ command.
abstract int	SHAiButtonUser.readAccountData(byte[] chlg, int chlgStart, byte[] dataBuffer, int dataStart, byte[] mac, int macStart) Reads the account data off the SHAiButton using a READ_AUTHENTICATE command.
boolean	SHAiButtonUser.refreshDevice() Refreshes eeprom SHA devices in case of weakly-programmed bits on the account page.
boolean	SHAiButtonUser33.setiButton33(OneWireContainer33 owc) Modifies this SHA iButton so that it refers to another DS1961S container.
boolean	SHAiButtonUser33.setiButtonUser(DSPortAdapter adapter, byte[] address) Modifies this SHA iButton so that it refers to another 1963S.
boolean	SHAiButtonUser33.setiButtonUser(byte[] address) Modifies this SHA iButton so that it refers to another device.
int	SHAiButtonUser33.getWriteCycleCounter() Returns the value of the write cycle counter for the page where the account data is stored.
boolean	SHAiButtonUser33.writeAccountData(byte[] dataBuffer, int offset) Writes the account data to the SHAiButton.
boolean	SHAiButtonUser33.readAccountData(byte[] dataBuffer, int offset) Reads the account data off the SHAiButton using a standard READ command.
int	SHAiButtonUser33.readAccountData(byte[] chlg, int chlgStart, byte[] dataBuffer, int dataStart, byte[] mac, int macStart) Reads the account data off the SHAiButton using a READ_AUTHENTICATE command.
boolean	SHAiButtonUser33.refreshDevice() Refreshes eeprom SHA devices in case of weakly-programmed bits on the account page.
boolean	SHADebit.setupTransactionData(SHAiButtonUser user) Setup account data on a fresh user iButton.
boolean	SHADebit.verifyUser(SHAiButtonUser user) Verifies user's authentication response.
boolean	SHADebit.verifyTransactionData(SHAiButtonUser user) Verifies user's account data.
boolean	SHADebit.executeTransaction(SHAiButtonUser user, boolean verifySuccess) Performs the signed debit, subtracting the debit amount from the user's balance and storing the new, signed account data on the user's iButton.
boolean	SHAiButtonUser18.setiButton18(OneWireContainer18 owc) Modifies this SHA iButton so that it refers to another DS1963S container.
boolean	SHAiButtonUser18.setiButtonUser(DSPortAdapter adapter, byte[] address) Modifies this SHA iButton so that it refers to another 1963S.
boolean	SHAiButtonUser18.setiButtonUser(byte[] address) Modifies this SHA iButton so that it refers to another device.
int	SHAiButtonUser18.getWriteCycleCounter() Returns the value of the write cycle counter for the page where the account data is stored.
boolean	SHAiButtonUser18.writeAccountData(byte[] dataBuffer, int offset) Writes the account data to the SHAiButton.
boolean	SHAiButtonUser18.readAccountData(byte[] dataBuffer, int offset) Reads the account data off the SHAiButton using a standard READ command.
int	SHAiButtonUser18.readAccountData(byte[] chlg, int chlgStart, byte[] dataBuffer, int dataStart, byte[] mac, int macStart) Reads the account data off the SHAiButton using a READ_AUTHENTICATE command.
boolean	SHASoftAuth.setupTransactionData(SHAiButtonUser user) Setup account data on a fresh user iButton.
boolean	SHASoftAuth.verifyUser(SHAiButtonUser user) Verifies user's authentication response.
boolean	SHASoftAuth.verifyTransactionData(SHAiButtonUser user) Verifies user's account data.
boolean	SHASoftAuth.executeTransaction(SHAiButtonUser user, boolean verifySuccess) Performs the signed debit, subtracting the debit amount from the user's balance and storing the new, signed account data on the user's iButton.

Constructors in com.dalsemi.onewire.application.sha that throw OneWireIOException

SHAiButtonCopr(OneWireContainer18 l_owc, String coprFilename, boolean l_formatDevice, int l_signPageNumber, int l_authPageNumber, int l_wspcPageNumber, int l_version, int l_encCode, byte l_serviceFileExt, byte[] l_serviceFilename, byte[] l_providerName, byte[] l_bindData, byte[] l_bindCode, byte[] l_auxData, byte[] l_initialSignature, byte[] l_signingChlg, byte[] l_signingSecret, byte[] l_authSecret)
Sets up this coprocessor object based on the provided parameters and saves all of these parameters as the contents of the file coprFilename stored on owc.

SHAiButtonCopr(OneWireContainer18 owc, String coprFilename)
Sets up this coprocessor object based on the contents of the file coprFilename stored on owc.

SHAiButtonCoprVM(byte[] RomID, int l_signPageNumber, int l_authPageNumber, int l_wspcPageNumber, int l_version, int l_encCode, byte l_serviceFileExt, byte[] l_serviceFilename, byte[] l_providerName, byte[] l_bindData, byte[] l_bindCode, byte[] l_auxData, byte[] l_initialSignature, byte[] l_signingChlg, byte[] l_signingSecret, byte[] l_authSecret)
Sets up this simulated coprocessor based on the provided parameters.

SHAiButtonCoprVM(String filename)
Loads a simulated DS1963S coprocessor device from disk.

SHAiButtonCoprVM(String filename, byte[] sign_secret, byte[] auth_secret)
Loads a simulated DS1963S coprocessor device from disk.

SHAiButtonCoprVM(OneWireContainer owc, String filename)
Loads a simulated DS1963S coprocessor device from any 1-Wire memory device supported by the 1-Wire File I/O API.

SHAiButtonCoprVM(OneWireContainer owc, String filename, byte[] sign_secret, byte[] auth_secret)
Loads a simulated DS1963S coprocessor device from any 1-Wire memory device supported by the 1-Wire File I/O API.

SHAiButtonCoprVM(OneWireContainer18 owc, String filename, byte[] sign_secret, byte[] auth_secret)
Simulates a specific DS1963S coprocessor device.

SHAiButtonUser33(SHAiButtonCopr copr, OneWireContainer33 owc, boolean formatDevice, byte[] authSecret)
Initialize a DS1961S as a fresh user iButton for a given SHA service.

SHAiButtonUser33(byte[] coprBindCode, byte[] fileName, int fileNameExt, OneWireContainer33 owc, boolean formatDevice, byte[] authSecret)
Initialize a DS1961S as a fresh user iButton for a given SHA service.

SHAiButtonUser33(SHAiButtonCopr copr, SHAiButtonCopr authCopr, OneWireContainer33 owc)
Creates a valid SHAiButtonUser object.

SHAiButtonUser33(byte[] coprBindCode, byte[] fileName, int fileNameExt, OneWireContainer33 owc)
Creates a valid SHAiButtonUser object.

SHAiButtonUser18(SHAiButtonCopr copr, OneWireContainer18 owc, boolean formatDevice, byte[] authSecret)
Initialize a DS1963S as a fresh user iButton for a given SHA service.

SHAiButtonUser18(byte[] coprBindData, byte[] coprBindCode, byte[] fileName, int fileNameExt, OneWireContainer18 owc, boolean formatDevice, byte[] authSecret)
Initialize a DS1963S as a fresh user iButton for a given SHA service.

SHAiButtonUser18(SHAiButtonCopr copr, OneWireContainer18 owc)
Creates a valid SHAiButtonUser object.

SHAiButtonUser18(byte[] coprBindCode, byte[] fileName, int fileNameExt, OneWireContainer18 owc)
Creates a valid SHAiButtonUser object.

Uses of OneWireIOException in com.dalsemi.onewire.application.tag

Methods in com.dalsemi.onewire.application.tag that throw OneWireIOException

void	TaggedActuator.setSelection(String selection) Set the selectionof this actuator
void	TaggedActuator.initActuator() Initialize the actuator
String	TaggedSensor.readSensor() The readSensor

Uses of OneWireIOException in com.dalsemi.onewire.container

Methods in com.dalsemi.onewire.container that throw OneWireIOException

void	ADContainer.doADConvert(int channel, byte[] state) Performs a voltage conversion on one specified channel.
void	ADContainer.doADConvert(boolean[] doConvert, byte[] state) Performs voltage conversion on one or more specified channels.
double[]	ADContainer.getADVoltage(byte[] state) Reads the value of the voltages after a doADConvert(boolean[],byte[]) method call.
double	ADContainer.getADVoltage(int channel, byte[] state) Reads the value of the voltages after a doADConvert(int,byte[]) method call.
boolean	OneWireContainer.isPresent() Verifies that the iButton or 1-Wire device is present on the 1-Wire Network.
boolean	OneWireContainer.isAlarming() Verifies that the iButton or 1-Wire device is present on the 1-Wire Network and in an alarm state.
void	OneWireContainer.doSpeed() Go to the specified speed for this container.
long	OneWireContainer1D.readCounter(int counterPage) Read the counter value associated with a page on this 1-Wire Device.
byte[]	OneWireSensor.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireSensor.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
byte[]	OneWireContainer1F.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireContainer1F.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
void	OneWireContainer1F.dischargeLines(int time) Force a power-on reset for parasitically powered 1-Wire devices connected to the main or auziliary output of the DS2409.
void	PagedMemoryBank.readPage(int page, boolean readContinue, byte[] readBuf, int offset) Reads a page in this memory bank with no CRC checking (device or data).
void	PagedMemoryBank.readPage(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Reads a page in this memory bank with extra information with no CRC checking (device or data).
int	PagedMemoryBank.readPagePacket(int page, boolean readContinue, byte[] readBuf, int offset) Reads a Universal Data Packet.
int	PagedMemoryBank.readPagePacket(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Reads a Universal Data Packet and extra information.
void	PagedMemoryBank.writePagePacket(int page, byte[] writeBuf, int offset, int len) Writes a Universal Data Packet.
void	PagedMemoryBank.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset) Reads a complete memory page with CRC verification provided by the device.
void	PagedMemoryBank.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Reads a complete memory page with CRC verification provided by the device with extra information.
void	OTPMemoryBank.lockPage(int page) Locks the specifed page in this memory bank.
boolean	OTPMemoryBank.isPageLocked(int page) Checks to see if the specified page is locked.
void	OTPMemoryBank.redirectPage(int page, int newPage) Redirects the specifed page to a new page.
int	OTPMemoryBank.isPageRedirected(int page) Deprecated. As of 1-Wire API 0.01, replaced by OTPMemoryBank.getRedirectedPage(int)
int	OTPMemoryBank.getRedirectedPage(int page) Gets the page redirection of the specified page.
void	OTPMemoryBank.lockRedirectPage(int page) Locks the redirection of the specifed page.
boolean	OTPMemoryBank.isRedirectPageLocked(int page) Checks to see if the specified page has redirection locked.
void	MemoryBank.read(int startAddr, boolean readContinue, byte[] readBuf, int offset, int len) Reads memory in this bank with no CRC checking (device or data).
void	MemoryBank.write(int startAddr, byte[] writeBuf, int offset, int len) Writes memory in this bank.
void	MemoryBankScratchSHAEE.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset) Read a complete memory page with CRC verification provided by the device.
void	MemoryBankScratchSHAEE.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Read a complete memory page with CRC verification provided by the device with extra information.
void	MemoryBankScratchSHAEE.readScratchpad(byte[] readBuf, int offset, int len, byte[] extraInfo) Read the scratchpad page of memory from a NVRAM device This method reads and returns the entire scratchpad after the byte offset regardless of the actual ending offset
void	MemoryBankScratchSHAEE.copyScratchpad(int addr, int len) Copy the scratchpad page to memory.
void	MemoryBankScratchSHAEE.copyScratchpad(int addr, byte[] scratchpad, int offset) Copy the scratchpad page to memory.
void	MemoryBankScratchSHAEE.copyScratchpad(int addr, byte[] scratchpad, int scratchpadOffset, byte[] pageData, int pageDataOffset) Copy the scratchpad page to memory.
void	MemoryBankScratchSHAEE.copyScratchpadWithMAC(int addr, byte[] authMAC, int authOffset) Copy all 8 bytes of the Sratch Pad to a certain address in memory using the provided authorization MAC
void	MemoryBankScratchSHAEE.writeScratchpad(int addr, byte[] writeBuf, int offset, int len) Write to the scratchpad page of memory a NVRAM device.
void	MemoryBankScratchSHAEE.write(int addr, byte[] writeBuf, int offset, int len) Write memory in the current bank.
void	MemoryBankScratchSHAEE.loadFirstSecret(int addr, byte[] data, int offset) Load First Secret for the DS2432.
void	MemoryBankScratchSHAEE.loadFirstSecret(int addr) Load First Secret for the DS2432.
void	MemoryBankScratchSHAEE.computeNextSecret(int addr) Computes the next secret.
void	MemoryBankScratchSHAEE.computeNextSecret(int addr, byte[] partialsecret, int offset) Computes the next secret.
void	MemoryBankScratchSHAEE.refreshScratchpad(int addr) Refreshes the scratchpad for DS1961S.
byte[]	OneWireContainer41.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireContainer41.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
byte	OneWireContainer41.readByte(int memAddr) Reads a single byte from the DS1922.
boolean	OneWireContainer41.getFlag(int register, byte bitMask) Gets the status of the specified flag from the specified register.
void	OneWireContainer41.setFlag(int register, byte bitMask, boolean flagValue) Sets the status of the specified flag in the specified register.
void	OneWireContainer41.stopMission() Stops the currently running mission.
void	OneWireContainer41.startMission() Starts a new mission.
void	OneWireContainer41.clearMemory() Erases the log memory from this missioning device.
void	OneWireContainer41.setDevicePasswordEnable(boolean enableReadOnly, boolean enableReadWrite, boolean enableWriteOnly) Enables/Disables passwords for this Device.
void	OneWireContainer41.setDevicePasswordEnableAll(boolean enableAll) Enables/Disables passwords for this device.
void	OneWireContainer41.setDeviceReadOnlyPassword(byte[] password, int offset) Writes the given password to the device's Read-Only password register.
void	OneWireContainer41.setDeviceReadWritePassword(byte[] password, int offset) Writes the given password to the device's Read/Write password register.
void	OneWireContainer41.setDeviceWriteOnlyPassword(byte[] password, int offset) Writes the given password to the device's Write-Only password register.
String	OneWireContainer41.getMissionLabel(int channel) Returns a default friendly label for each channel supported by this Missioning device.
void	OneWireContainer41.setStartUponTemperatureAlarmEnable(boolean enable) Sets the SUTA (Start Upon Temperature Alarm) bit in the Mission Control register.
void	OneWireContainer41.setStartUponTemperatureAlarmEnable(boolean enable, byte[] state) Sets the SUTA (Start Upon Temperature Alarm) bit in the Mission Control register.
boolean	OneWireContainer41.isStartUponTemperatureAlarmEnabled() Returns true if the SUTA (Start Upon Temperature Alarm) bit in the Mission Control register is set.
boolean	OneWireContainer41.isStartUponTemperatureAlarmEnabled(byte[] state) Returns true if the SUTA (Start Upon Temperature Alarm) bit in the Mission Control register is set.
boolean	OneWireContainer41.isMissionSUTA() Returns true if the currently loaded mission results indicate that this mission has the SUTA bit enabled.
boolean	OneWireContainer41.isMissionWFTA() Returns true if the currently loaded mission results indicate that this mission has the SUTA bit enabled and is still Waiting For Temperature Alarm (WFTA).
void	OneWireContainer41.startNewMission(int sampleRate, int missionStartDelay, boolean rolloverEnabled, boolean syncClock, boolean[] channelEnabled) Begins a new mission on this missioning device.
void	OneWireContainer41.loadMissionResults() Loads the results of the currently running mission.
void	OneWireContainer41.setMissionChannelEnable(int channel, boolean enable) Enables/disables the specified mission channel, indicating whether or not the channel's readings will be recorded in the mission log.
boolean	OneWireContainer41.getMissionChannelEnable(int channel) Returns true if the specified mission channel is enabled, indicating that the channel's readings will be recorded in the mission log.
int	OneWireContainer41.getMissionSampleRate(int channel) Returns the amount of time, in seconds, between samples taken by this missioning device.
int	OneWireContainer41.getMissionSampleCount(int channel) Returns the number of samples available for the specified channel during the current mission.
int	OneWireContainer41.getDeviceSampleCount() Reads the device and returns the total number of samples logged since the first power-on of this device.
int	OneWireContainer41.getDeviceSampleCount(byte[] state) Returns the total number of samples logged since the first power-on of this device.
int	OneWireContainer41.getMissionSampleCountTotal(int channel) Returns the total number of samples taken for the specified channel during the current mission.
double	OneWireContainer41.getMissionSample(int channel, int sampleNum) Returns the sample as degrees celsius if temperature channel is specified or as percent relative humidity if data channel is specified.
int	OneWireContainer41.getMissionSampleAsInteger(int channel, int sampleNum) Returns the sample as an integer value.
long	OneWireContainer41.getMissionSampleTimeStamp(int channel, int sampleNum) Returns the time, in milliseconds, that each sample was taken by the current mission.
boolean	OneWireContainer41.isMissionRunning() Returns true if a mission is currently running.
boolean	OneWireContainer41.isMissionRolloverEnabled() Returns true if a rollover is enabled.
boolean	OneWireContainer41.hasMissionRolloverOccurred() Returns true if a mission has rolled over.
void	OneWireContainer41.clearMissionResults() Clears the mission results and erases the log memory from this missioning device.
long	OneWireContainer41.getMissionTimeStamp(int channel) Returns the time, in milliseconds, that the mission began.
long	OneWireContainer41.getFirstSampleOffset(int channel) Returns the amount of time, in milliseconds, before the first sample occurred.
double[]	OneWireContainer41.getMissionResolutions(int channel) Returns all available resolutions for the specified mission channel.
double	OneWireContainer41.getMissionResolution(int channel) Returns the currently selected resolution for the specified channel.
void	OneWireContainer41.setMissionResolution(int channel, double resolution) Sets the selected resolution for the specified channel.
boolean	OneWireContainer41.hasMissionAlarmed(int channel, int alarmType) Returns true if the specified channel's alarm value of the specified type has been triggered during the mission.
boolean	OneWireContainer41.getMissionAlarmEnable(int channel, int alarmType) Returns true if the alarm of the specified type has been enabled for the specified channel.
void	OneWireContainer41.setMissionAlarmEnable(int channel, int alarmType, boolean enable) Enables/disables the alarm of the specified type for the specified channel
double	OneWireContainer41.getMissionAlarm(int channel, int alarmType) Returns the threshold value which will trigger the alarm of the specified type on the specified channel.
void	OneWireContainer41.setMissionAlarm(int channel, int alarmType, double threshold) Sets the threshold value which will trigger the alarm of the specified type on the specified channel.
void	OneWireContainer41.doTemperatureConvert(byte[] state) Performs a temperature conversion.
void	OneWireContainer41.doHumidityConvert(byte[] state) Performs a Humidity conversion.
void	OneWireContainer41.doADConvert(int channel, byte[] state) Performs a voltage conversion on one specified channel.
void	OneWireContainer41.doADConvert(boolean[] doConvert, byte[] state) Performs voltage conversion on one or more specified channels.
double[]	OneWireContainer41.getADVoltage(byte[] state) Reads the value of the voltages after a doADConvert(boolean[],byte[]) method call.
double	OneWireContainer41.getADVoltage(int channel, byte[] state) Reads the value of the voltages after a doADConvert(int,byte[]) method call.
void	OneWireContainer21.writeByte(int memAddr, byte source) Writes a byte of data into the DS1921's memory.
byte	OneWireContainer21.readByte(int memAddr) Reads a single byte from the DS1921.
boolean	OneWireContainer21.getFlag(int register, byte bitMask) Gets the status of the specified flag from the specified register.
void	OneWireContainer21.setFlag(int register, byte bitMask, boolean flagValue) Sets the status of the specified flag in the specified register.
void	OneWireContainer21.enableMission(int sampleRate) Begins this DS1921's mission.
void	OneWireContainer21.disableMission() Ends this DS1921's running mission.
void	OneWireContainer21.clearMemory() Clears the memory of any previous mission.
byte[]	OneWireContainer21.getTemperatureLog(byte[] state) Returns the log of temperature measurements.
int[]	OneWireContainer21.getTemperatureHistogram() Returns an array of at most 64 counter bins holding the DS1921 histogram data (63 bins for the DS1921L-F5X and 64 bins for the DS1921H or DS1921Z).
byte[]	OneWireContainer21.getAlarmHistory(byte alarmBit) Returns an array containing the alarm log.
byte[]	OneWireContainer21.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireContainer21.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
void	OneWireContainer21.doTemperatureConvert(byte[] state) Performs a temperature conversion.
void	TemperatureContainer.doTemperatureConvert(byte[] state) Performs a temperature conversion.
double	TemperatureContainer.getTemperature(byte[] state) Gets the temperature value in Celsius from the state data retrieved from the readDevice() method.
boolean	OneWireContainer33.isContainerSecretSet() Get the current status of the secret.
boolean	OneWireContainer33.isSecretWriteProtected() Get the status of the secret, if it is write protected.
boolean	OneWireContainer33.isWriteProtectAllSet() Get the status of all the pages, if they are write protected.
void	OneWireContainer33.writeProtectSecret() Write protects the secret for the DS2432.
void	OneWireContainer33.writeProtectAll() Write protect pages 0 to 3
void	OneWireContainer33.setEPROMModePageOne() Sets the EPROM mode for page 1.
boolean	OneWireContainer33.isPageOneEPROMmode() Tells if page one is in EPROM mode.
void	OneWireContainer33.writeProtectPageZero() Write protect page zero only.
boolean	OneWireContainer33.isWriteProtectPageZeroSet() Get the status of page zero, if it is write protected.
void	OneWireContainer33.computeNextSecret(int pageNum, byte[] partialsecret, int offset) Compute Next Secret
void	OneWireContainer33.computeNextSecret(int pageNum) Compute Next Secret using the current contents of data page and scratchpad.
boolean	OneWireContainer33.loadFirstSecret(byte[] data, int offset) Load First Secret
boolean	OneWireContainer33.refreshPage(int page, int offset) Refreshes a particular 8-byte set of data on a given page.
boolean	OneWireContainer33.refreshPage(int page) Refreshes all 32 bytes of data on a given page.
boolean	OneWireContainer33.installMasterSecret(int page, byte[] newSecret) Installs a secret on a DS1961S/DS2432.
boolean	OneWireContainer33.bindSecretToiButton(int pageNum, byte[] bindData) Binds an installed secret to a DS1961S/DS2432 by using well-known binding data and the DS1961S/DS2432's unique address.
boolean	OneWireContainer33.writeDataPage(int targetPage, byte[] pageData) Writes a data page to the DS1961S/DS2432.
boolean	OneWireContainer33.writeDataPage(int targetPage, byte[] pageData, int offset) Writes a data page to the DS1961S/DS2432.
boolean	OneWireContainer33.writeScratchpad(int targetPage, int targetPageOffset, byte[] inputbuffer, int start, int length) Writes data to the scratchpad.
void	OneWireContainer33.readScratchpad(byte[] scratchpad, int offset, byte[] extraInfo) Read from the Scratch Pad, which is a max of 8 bytes.
boolean	OneWireContainer33.copyScratchpad(int targetPage, int targetPageOffset, byte[] copy_auth, int authStart) Copy all 8 bytes of the Sratch Pad to a certain page and offset in memory.
boolean	OneWireContainer33.copyScratchpad(int targetPage, int targetPageOffset) Copy all 8 bytes of the Sratch Pad to a certain page and offset in memory.
boolean	OneWireContainer33.readMemoryPage(int page, byte[] pageData, int offset) Reads a page of memory..
boolean	OneWireContainer33.readAuthenticatedPage(int page, byte[] pagedata, int offset, byte[] computed_mac, int macStart) Reads and authenticates a page.
byte[]	OneWireContainer05.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireContainer05.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
void	OneWireContainer37.setDevicePasswordEnableAll(boolean enableAll) Enables/Disables passwords for this device.
void	OneWireContainer37.setDeviceReadOnlyPassword(byte[] password, int offset) Attempts to change the value of the read password in the device's register.
void	OneWireContainer37.setDeviceReadWritePassword(byte[] password, int offset) Attempts to change the value of the read/write password in the device's register.
void	OneWireContainer37.setDeviceWriteOnlyPassword(byte[] password, int offset) Attempts to change the value of the write only password in the device's register.
void	OneWireContainer37.setDevicePasswordEnable(boolean enableReadOnly, boolean enableReadWrite, boolean enableWriteOnly) Enables/disables passwords by writing to the devices password control register.
boolean	OneWireContainer37.verifyPassword(byte[] password, int offset, int type)
byte[]	OneWireContainer24.readDevice() Retrieves the five byte state over the 1-Wire bus.
void	OneWireContainer24.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
byte[]	OneWireContainer29.readDevice() Retrieves the 1-Wire device sensor state.
byte[]	OneWireContainer29.readRegister() Retrieves the 1-Wire device register mask.
void	OneWireContainer29.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
void	OneWireContainer29.writeRegister(byte[] register) Writes the 1-Wire device register mask that have been changed by 'set' methods.
void	OneWireContainer29.setResetMode(byte[] register, boolean set) Turns the Reset mode on/off.
boolean	OneWireContainer29.getVCC(byte[] register) Retrieves the state of the VCC pin.
int	OneWireContainer2C.getWiperPosition() Gets the current wiper position of this device.
boolean	OneWireContainer2C.setWiperPosition(int position) Sets the wiper position for the potentiometer.
int	OneWireContainer2C.increment(boolean reselect) Increments the wiper position.
int	OneWireContainer2C.decrement(boolean reselect) Decrements the wiper position.
int	OneWireContainer2C.increment() Increments the wiper position after selecting the part.
int	OneWireContainer2C.decrement() Decrements the wiper position after selecting the part.
byte[]	OneWireContainer2C.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireContainer2C.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by the 'set' methods.
void	MemoryBankScratchCRCPW.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset) Read a complete memory page with CRC verification provided by the device.
void	MemoryBankScratchCRCPW.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Read a complete memory page with CRC verification provided by the device with extra information.
void	MemoryBankScratchCRCPW.readScratchpad(byte[] readBuf, int offset, int len, byte[] extraInfo) Read the scratchpad page of memory from a NVRAM device This method reads and returns the entire scratchpad after the byte offset regardless of the actual ending offset
void	MemoryBankScratchCRCPW.copyScratchpad(int startAddr, int len) Copy the scratchpad page to memory.
void	MemoryBankScratchCRCPW.writeScratchpad(int startAddr, byte[] writeBuf, int offset, int len) Write to the scratchpad page of memory a NVRAM device.
void	MemoryBankSHAEE.read(int startAddr, boolean readContinue, byte[] readBuf, int offset, int len) Read memory in the current bank with no CRC checking (device or data).
void	MemoryBankSHAEE.write(int startAddr, byte[] writeBuf, int offset, int len) Write memory in the current bank.
void	MemoryBankSHAEE.readPage(int page, boolean readContinue, byte[] readBuf, int offset) Read page in the current bank with no CRC checking (device or data).
void	MemoryBankSHAEE.readPage(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Read page with extra information in the current bank with no CRC checking (device or data).
int	MemoryBankSHAEE.readPagePacket(int page, boolean readContinue, byte[] readBuf, int offset) Read a Universal Data Packet.
int	MemoryBankSHAEE.readPagePacket(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Read a Universal Data Packet and extra information.
void	MemoryBankSHAEE.writePagePacket(int page, byte[] writeBuf, int offset, int len) Write a Universal Data Packet.
void	MemoryBankSHAEE.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset) Read a complete memory page with CRC verification provided by the device.
void	MemoryBankSHAEE.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Read a complete memory page with CRC verification provided by the device with extra information.
void	MemoryBankSHAEE.checkSpeed() Check the device speed if has not been done before or if an error was detected.
boolean	MemoryBankSHAEE.readAuthenticatedPage(int page, byte[] data, int dataStart, byte[] extra_info, int extraStart) Reads authenticated page.
void	MissionContainer.startNewMission(int sampleRate, int missionStartDelay, boolean rolloverEnabled, boolean syncClock, boolean[] channelEnabled) Begins a new mission on this missioning device.
void	MissionContainer.stopMission() Ends the currently running mission.
boolean	MissionContainer.isMissionRunning() Returns true if a mission is currently running.
boolean	MissionContainer.isMissionRolloverEnabled() Returns true if a rollover is enabled.
boolean	MissionContainer.hasMissionRolloverOccurred() Returns true if a mission has rolled over.
void	MissionContainer.loadMissionResults() Loads the results of the currently running mission.
void	MissionContainer.clearMissionResults() Clears the mission results and erases the log memory from this missioning device.
int	MissionContainer.getNumberMissionChannels() Gets the number of channels supported by this Missioning device.
void	MissionContainer.setMissionChannelEnable(int channel, boolean enable) Enables/disables the specified mission channel, indicating whether or not the channel's readings will be recorded in the mission log.
boolean	MissionContainer.getMissionChannelEnable(int channel) Returns true if the specified mission channel is enabled, indicating that the channel's readings will be recorded in the mission log.
String	MissionContainer.getMissionLabel(int channel) Returns a default friendly label for each channel supported by this Missioning device.
long	MissionContainer.getMissionTimeStamp(int channel) Returns the time, in milliseconds, that the mission began.
long	MissionContainer.getFirstSampleOffset(int channel) Returns the amount of time, in milliseconds, before the first sample occurred.
int	MissionContainer.getMissionSampleRate(int channel) Returns the amount of time, in seconds, between samples taken by this missioning device.
int	MissionContainer.getMissionSampleCount(int channel) Returns the number of samples taken for the specified channel during the current mission.
int	MissionContainer.getMissionSampleCountTotal(int channel) Returns the total number of samples taken for the specified channel during the current mission.
double	MissionContainer.getMissionSample(int channel, int sampleNum) Returns the value of each sample taken by the current mission.
long	MissionContainer.getMissionSampleTimeStamp(int channel, int sampleNum) Returns the time, in milliseconds, that each sample was taken by the current mission.
double[]	MissionContainer.getMissionResolutions(int channel) Returns all available resolutions for the specified mission channel.
double	MissionContainer.getMissionResolution(int channel) Returns the currently selected resolution for the specified channel.
void	MissionContainer.setMissionResolution(int channel, double resolution) Sets the selected resolution for the specified channel.
boolean	MissionContainer.hasMissionAlarmed(int channel, int alarmType) Returns true if the specified channel's alarm value of the specified type has been triggered during the mission.
boolean	MissionContainer.getMissionAlarmEnable(int channel, int alarmType) Returns true if the alarm of the specified type has been enabled for the specified channel.
void	MissionContainer.setMissionAlarmEnable(int channel, int alarmType, boolean enable) Enables/disables the alarm of the specified type for the specified channel
double	MissionContainer.getMissionAlarm(int channel, int alarmType) Returns the threshold value which will trigger the alarm of the specified type on the specified channel.
void	MissionContainer.setMissionAlarm(int channel, int alarmType, double threshold) Sets the threshold value which will trigger the alarm of the specified type on the specified channel.
byte[]	JibComm.transferJibData(byte[] data, int runTime) Transfers data to and from this Java iButton.
void	JibComm.correctPOR() Corrects the device from a Power-On-Reset (POR) error.
void	JibComm.getStatus(byte[] status, int start) Gets the status from this Java iButton.
void	JibComm.checkStatus(int runTime, int dir, byte[] status, int start) Checks the status of this Java iButton.
void	JibComm.setStatus(int runTime) Sets status register of this Java iButton.
void	JibComm.setHeader(byte[] header) Sets header to be written to this Java iButton.
void	JibComm.getHeader(byte[] header, int start) Gets header from this Java iButton.
void	JibComm.setData(byte[] data) Sets data to be written to this Java iButton.
byte[]	JibComm.getData(int length) Gets data from this Java iButton.
void	JibComm.run(int runTime) Runs the Micro in this Java iButton.
void	JibComm.interrupt(int runTime) Interrupts the Micro in this Java iButton.
void	JibComm.reset() Resets the Micro in this Java iButton.
void	JibComm.sendCommand(byte[] commandBuffer, byte[] releaseBuffer, boolean powerMode, long sleepTime) Sends command to this Java iButton.
int	PotentiometerContainer.getWiperPosition() Gets the current wiper position of the Potentiometer.
boolean	PotentiometerContainer.setWiperPosition(int position) Sets the wiper position of the potentiometer.
int	PotentiometerContainer.increment(boolean reselect) Increments the wiper position by one.
int	PotentiometerContainer.decrement(boolean reselect) Decrements the wiper position.
int	PotentiometerContainer.increment() Increments the wiper position after selecting the part.
int	PotentiometerContainer.decrement() Decrements the wiper position after selecting the part.
void	OneWireContainer10.doTemperatureConvert(byte[] state) Performs a temperature conversion on state information.
double	OneWireContainer10.getTemperature(byte[] state) Gets the temperature value in Celsius from the state data retrieved from the readDevice() method.
byte[]	OneWireContainer10.readDevice() Retrieves this OneWireContainer10 state information.
void	OneWireContainer10.writeDevice(byte[] state) Writes to this OneWireContainer10 state information that have been changed by 'set' methods.
byte	OneWireContainer30.readByte(int memAddr) Reads a register byte from the memory of the DS2760.
void	OneWireContainer30.readBytes(int memAddr, byte[] buffer, int start, int len) Reads bytes from the DS2760.
void	OneWireContainer30.writeByte(int memAddr, byte data) Writes a register byte to the memory of the DS2760.
byte[]	OneWireContainer30.readEEPROMBlock(int blockNumber) Reads a 16 byte data block from one of the user EEPROM blocks.
void	OneWireContainer30.writeEEPROMBlock(int blockNumber, byte[] data) Writes a 16 byte data block to one of the user blocks.
void	OneWireContainer30.lockBlock(int blockNumber) Permanently write-protects one of the user blocks of EEPROM.
boolean	OneWireContainer30.getFlag(int memAddr, byte flagToGet) Checks the specified flag in the specified register.
void	OneWireContainer30.setFlag(int memAddr, byte flagToSet, boolean flagValue) Sets one of the flags in one of the registers. Valid registers are: PROTECTION_REGISTER, STATUS_REGISTER, EEPROM_REGISTER and SPECIAL_FEATURE_REGISTER.
double	OneWireContainer30.getCurrent(byte[] state) Gets the instantaneous current.
void	OneWireContainer30.setRemainingCapacity(double remainingCapacity) Allows user to set the remaining capacity.
double	OneWireContainer30.getRemainingCapacity(byte[] state) Calculates the remaining capacity in mAHours from the current Accumulator.
void	OneWireContainer30.setLatchState(boolean on) Sets the state for the Programmable Input/Output pin.
boolean	OneWireContainer30.getLatchState() Returns the latch state of the Programmable Input/Ouput pin on the DS2760.
void	OneWireContainer30.clearConditions() Clears the overvoltage, undervoltage, charge overcurrent, and discharge overcurrent flags.
void	OneWireContainer30.doADConvert(int channel, byte[] state) Performs voltage conversion on the specified channel.
void	OneWireContainer30.doADConvert(boolean[] doConvert, byte[] state) Performs voltage conversion on all specified channels.
double[]	OneWireContainer30.getADVoltage(byte[] state) Reads the voltage values.
double	OneWireContainer30.getADVoltage(int channel, byte[] state) Reads a channel voltage value.
void	OneWireContainer30.doTemperatureConvert(byte[] state) Performs a temperature conversion.
void	OneWireContainer30.setTemperatureAlarm(int alarmType, double alarmValue, byte[] state) Sets the temperature alarm value in degrees C in the provided state data.
void	OneWireContainer30.setTemperatureResolution(double resolution, byte[] state) Sets the current temperature resolution in degrees C in the provided state data.
byte[]	OneWireContainer30.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireContainer30.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by the 'set' methods.
byte[]	OneWireContainer20.readDevice() Retrieves the entire A/D control/status and alarm pages.
void	OneWireContainer20.writeDevice(byte[] state) Writes the bytes in the provided A/D register pages that have been changed by the 'set' methods.
double[]	OneWireContainer20.getADVoltage(byte[] state) Reads the voltage values.
double	OneWireContainer20.getADVoltage(int channel, byte[] state) Reads a channels voltage value.
void	OneWireContainer20.doADConvert(int channel, byte[] state) Performs voltage conversion on specified channel.
void	OneWireContainer20.doADConvert(boolean[] doConvert, byte[] state) Performs voltage conversion on all specified channels.
void	OneWireContainer20.doADConvert(int channel, int preset, byte[] state) Performs voltage conversion on specified channel.
void	OneWireContainer20.doADConvert(boolean[] doConvert, int[] preset, byte[] state) Performs voltage conversion on all specified channels.
byte[]	OneWireContainer12.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireContainer12.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
byte[]	OneWireContainer12.channelAccess(byte[] inbuffer, boolean toggleRW, boolean readInitially, int CRCMode, int channelMode, boolean clearActivity, boolean interleave) Accesses the PIO channels to sense the logical status of the output node.
void	OneWireContainer02.writeScratchpad(int addr, byte[] data) Writes the data to the scratchpad from the given address.
byte[]	OneWireContainer02.readScratchpad() Reads the entire scratchpad.
void	OneWireContainer02.copyScratchpad(int key, byte[] passwd, int blockNum) Writes the data from the scratchpad to the specified block or blocks.
byte[]	OneWireContainer02.readSubkey(int key, byte[] passwd) Reads the subkey requested with the given key name and password.
void	OneWireContainer02.readSubkey(byte[] data, int key, byte[] passwd) Reads the subkey requested with the given key name and password.
void	OneWireContainer02.writePassword(int key, byte[] oldName, byte[] newName, byte[] newPasswd) Writes a new identifier and password to the secure subkey iButton
void	OneWireContainer02.writeSubkey(int key, int addr, byte[] passwd, byte[] data) Writes new data to the secure subkey
void	OneWireContainer28.doTemperatureConvert(byte[] state) Performs a temperature conversion on state information.
double	OneWireContainer28.getTemperature(byte[] state) Gets the temperature value in Celsius from the state data retrieved from the readDevice() method.
void	OneWireContainer28.setTemperatureAlarm(int alarmType, double alarmValue, byte[] state) Sets the temperature alarm value in Celsius in the provided state data.
byte[]	OneWireContainer28.readDevice() Retrieves this OneWireContainer28 state information.
void	OneWireContainer28.writeDevice(byte[] state) Writes to this OneWireContainer28 state information that have been changed by 'set' methods.
byte[]	OneWireContainer28.readScratchpad() Reads the Scratchpad of the DS18B20.
void	OneWireContainer28.writeScratchpad(byte[] data) Writes to the Scratchpad of the DS18B20.
void	OneWireContainer28.copyScratchpad() Copies the Scratchpad to the E-squared memory of the DS18B20.
byte[]	OneWireContainer28.recallE2() Recalls the DS18B20 temperature trigger values (ALARM_HIGH and ALARM_LOW) and the configuration register to the scratchpad and reads the scratchpad.
boolean	OneWireContainer28.isExternalPowerSupplied() Reads the way power is supplied to the DS18B20.
void	MemoryBankNVCRCPW.readPageCRC(int page, boolean readContinue, byte[] readBuf, int offset, byte[] extraInfo) Read a complete memory page with CRC verification provided by the device with extra information.
void	MemoryBankNVCRCPW.read(int startAddr, boolean readContinue, byte[] readBuf, int offset, int len) Read memory in the current bank with no CRC checking (device or data).
void	MemoryBankNVCRCPW.write(int startAddr, byte[] writeBuf, int offset, int len) Write memory in the current bank.
byte[]	OneWireContainer04.readDevice() Retrieves the 1-Wire device sensor state.
void	OneWireContainer04.writeDevice(byte[] state) Writes the 1-Wire device sensor state that have been changed by 'set' methods.
ResponseAPDU	OneWireContainer16.getFreeRAM() Gets the amount of free RAM in this Java iButton.
ResponseAPDU	OneWireContainer16.getRandomBytes(int numBytes) Gets requested number of bytes of random data generated by this Java iButton.
ResponseAPDU	OneWireContainer16.getFirmwareVersionString() Gets the firmware version string.
ResponseAPDU	OneWireContainer16.getLastError() Gets the last error value.
ResponseAPDU	OneWireContainer16.getErrorReportingMode() Gets the Error Reporting Mode.
ResponseAPDU	OneWireContainer16.setErrorReportingMode(int mode) Sets the Error Reporting mode.
ResponseAPDU	OneWireContainer16.getAIDByNumber(int index) Gets the AID of the applet by its installed number.
ResponseAPDU	OneWireContainer16.deleteSelectedApplet() Deletes the currently selected applet.
ResponseAPDU	OneWireContainer16.deleteAppletByNumber(int index) Deletes an applet by its installed number.
ResponseAPDU	OneWireContainer16.deleteAppletByAID(String aid) Deletes an applet by its AID.
ResponseAPDU	OneWireContainer16.loadApplet(InputStream appletInputStream, String aid) Loads an applet onto this Java iButton.
ResponseAPDU	OneWireContainer16.loadApplet(String fileName, String directoryName, String aid) Loads an applet onto this Java iButton.
ResponseAPDU	OneWireContainer16.masterErase() Clears all memory in this Java iButton.
ResponseAPDU	OneWireContainer16.getPORCount() Gets the number of times this Java iButton has been power-on-reset (POR) since the last master erase.
ResponseAPDU	OneWireContainer16.getRealTimeClock() Gets the Real Time Clock.
ResponseAPDU	OneWireContainer16.getATR() Gets the Answer To Reset (ATR) from this Java iButton.
ResponseAPDU	OneWireContainer16.getEphemeralGCMode() Gets the Ephemeral Gabage Collection Mode.
ResponseAPDU	OneWireContainer16.getAppletGCMode() Gets the Applet Garbage Collection Mode.
ResponseAPDU	OneWireContainer16.getCommandPINMode() Gets the Command PIN Mode.
ResponseAPDU	OneWireContainer16.getLoadPINMode() Gets the Load PIN Mode.
ResponseAPDU	OneWireContainer16.getRestoreMode() Gets the Restore Mode.
ResponseAPDU	OneWireContainer16.getExceptionMode() Gets the Exception Mode.
ResponseAPDU	OneWireContainer16.getCommitBufferSize() Gets the size of the Commit Buffer.
ResponseAPDU	OneWireContainer16.setCommonPIN(String newPIN) Sets the Common PIN.
ResponseAPDU	OneWireContainer16.setEphemeralGCMode(int mode) Sets the Ephemeral Garbage Collection Mode.
ResponseAPDU	OneWireContainer16.setAppletGCMode(int mode) Sets the Applet Garbage Collection Mode.
ResponseAPDU	OneWireContainer16.setCommandPINMode(int mode) Sets the Command PIN Mode.
ResponseAPDU	OneWireContainer16.setLoadPINMode(int mode) Sets the Load PIN Mode.
ResponseAPDU	OneWireContainer16.setRestoreMode(int mode) Sets the Restore Mode.
ResponseAPDU	OneWireContainer16.setExceptionMode(int mode) Sets the Exception Mode.
ResponseAPDU	OneWireContainer16.setCommitBufferSize(int size) Sets the Commit Buffer size.
ResponseAPDU	OneWireContainer16.select(String aid) Selects an applet by AID.
ResponseAPDU	OneWireContainer16.process(CommandAPDU capdu) Sends a generic process command to this JavaiButton.
ResponseAPDU	OneWireContainer16.sendAPDU(CommandAPDU capdu, int runTime) Sends a CommandAPDU to this Java iButton.
byte[]	OneWireContainer26.readPage(int page) Reads the specified 8 byte page and returns the data in an array.
void	OneWireContainer26.writePage(int page, byte[] source, int offset) Writes a page of memory to this device.
boolean	OneWireContainer26.getFlag(byte flagToGet) Checks the specified flag in the status/configuration register and returns its status as a boolean.
void	OneWireContainer26.setFlag(byte flagToSet, boolean flagValue) Set one of the flags in the STATUS/CONFIGURATION register.
double	OneWireContainer26.getRemainingCapacity() Calculate the remaining capacity in mAH as outlined in the data sheet.
boolean	OneWireContainer26.isCharging(byte[] state) Determines if the battery is charging and returns a boolean.
void	OneWireContainer26.calibrateCurrentADC() Calibrate the current ADC.
void	OneWireContainer26.setThreshold(byte thresholdValue) Set the minimum current measurement magnitude for which the ICA/CCA/DCA are incremented.
int	OneWireContainer26.getICA() Retrieves the current ICA value in mVHr.
int	OneWireContainer26.getCCA() Retrieves the current CCA value in mVHr.
int	OneWireContainer26.getDCA() Retrieves the value of the DCA in mVHr.
void	OneWireContainer26.setICA(int icaValue) Set the value of the ICA.
void	OneWireContainer26.setCCA(int ccaValue) Set the value of the CCA.
void	OneWireContainer26.setDCA(int dcaValue) Set the value of the DCA.
void	OneWireContainer26.doADConvert(int channel, byte[] state) This method is used to perform voltage conversion on all specified channels.
void	OneWireContainer26.doADConvert(boolean[] doConvert, byte[] state) This method is used to perform voltage conversion on all specified channels.
double[]	OneWireContainer26.getADVoltage(byte[] state) This method is used to read the voltage values.
double	OneWireContainer26.getADVoltage(int channel, byte[] state) This method is used to read a channels voltage value.
byte[]	OneWireContainer26.readDevice() This method retrieves the 1-Wire device sensor state.
void	OneWireContainer26.writeDevice(byte[] state) This method write the 1-Wire device sensor state that have been changed by the 'set' methods.
void	OneWireContainer26.doTemperatureConvert(byte[] state) Perform an temperature conversion.
void	OneWireContainer26.setTemperatureAlarm(int alarmType, double alarmValue, byte[] state) This method sets the alarm value in degrees C in the provided state data.
void	OneWireContainer26.setTemperatureResolution(double resolution, byte[] state) This method sets the current resolution in degrees C in the provided state data.
void	OneWireContainer26.doHumidityConvert(byte[] state) Performs a Humidity conversion.
boolean	OneWireContainer18.eraseScratchPad(int page) Erases the scratchpad of the DS1963S.
boolean	OneWireContainer18.waitForSuccessfulFinish() Waits for the DS1963S's output to alternate.
void	OneWireContainer18.readMemoryPage(int pageNum, byte[] data, int start) Reads a memory page from the DS1963S.
boolean	OneWireContainer18.readAuthenticatedPage(int pageNum, byte[] data, int start) Reads and authenticates a page.
boolean	OneWireContainer18.writeScratchPad(int targetPage, int targetPageOffset, byte[] inputbuffer, int start, int length) Writes data to the scratchpad.
boolean	OneWireContainer18.matchScratchPad(byte[] mac) Verifies the hidden signature in the scratchpad of the DS1963S.
int	OneWireContainer18.readScratchPad(byte[] data, int start) Reads the contents of the DS1963S scratchpad.
boolean	OneWireContainer18.copyScratchPad() Copies the contents of the scratchpad to the target destination that was specified in a call to writeScratchPad() or eraseScratchPad().
boolean	OneWireContainer18.installMasterSecret(int page, byte[] secret, int secret_number) Installs a secret on a DS1963S.
boolean	OneWireContainer18.bindSecretToiButton(int page, byte[] bind_data, byte[] bind_code, int secret_number) Binds an installed secret to a DS1963S by using well-known binding data and the DS1963S's unique address.
boolean	OneWireContainer18.writeDataPage(int page_number, byte[] page_data) Writes a data page to the DS1963S.
boolean	OneWireContainer18.SHAFunction(byte function) Performs one of the DS1963S's cryptographic functions.
boolean	OneWireContainer18.SHAFunction(byte function, int T) Performs one of the DS1963S's cryptographic functions.
void	PasswordContainer.setDevicePasswordEnable(boolean enableReadOnly, boolean enableReadWrite, boolean enableWriteOnly) Enables/Disables passwords for this Device.
void	PasswordContainer.setDevicePasswordEnableAll(boolean enableAll) Enables/Disables passwords for this device.
void	PasswordContainer.setDeviceReadOnlyPassword(byte[] password, int offset) Writes the given password to the device's Read-Only password register.
void	PasswordContainer.setDeviceReadWritePassword(byte[] password, int offset) Writes the given password to the device's Read/Write password register.
void	PasswordContainer.setDeviceWriteOnlyPassword(byte[] password, int offset) Writes the given password to the device's Write-Only password register.
void	HumidityContainer.doHumidityConvert(byte[] state) Performs a Humidity conversion.

Uses of OneWireIOException in com.dalsemi.onewire.utils

Methods in com.dalsemi.onewire.utils that throw OneWireIOException

void	OWPath.open() Open this 1-Wire path so that a remote device can be accessed.
void	OWPath.close() Close each element in this 1-Wire path in reverse order.